AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
25
IPv6 Gateway— Displays the IPv6 address of the next hop of the
switch’s default route. The switch uses a default route when it must
communicate with a device that is not on the local IPv6 network.
The Services section displays the following information:
SNMP— Indicates the SNMP setting of the switch.
HTTP— Indicates the HTTP setting of the switch
Telnet— Indicates if Telnet is enabled or disabled on the switch.
SSH— Indicates if SSH is enabled or disabled on the switch.
Spanning Tree— Indicates if RSTP or STP is enabled on the
switch. The default setting is “RSTP.”
QoS— Indicates is QoS is enabled or disabled on the switch.
LLDP— Indicates if LLDP is enabled or disabled on the switch.
SFLOW— Indicates is sFlow is enabled or disabled on the switch.
802.1x Port Authentication— Indicates if 802.1x Port
Authentication is enabled or disabled on the switch.
Remote Logging— Indicates if the remote log is enabled or
disabled on the switch.
IGMP Snooping— Indicates if IGMP Snooping is enabled or
disabled on the switch.
The Administration Options section displays the following information:
System Upgrade— Select this field to upgrade your system
software. See “Upgrading the Software” on page 51.
Reboot— Select this field to reboot the switch. For instructions,
see “Rebooting a Switch” on page 50.