Chapter 4: Setting Port Parameters
66
Displaying the Storm Control Settings
To display the storm control settings, do the following:
1. Select the Switching tab.
The Switching tab is displayed. See Figure 19 on page 58.
2. From the Switching tab, select Port.
The Port tab expands to the right.
3. From the Port tab, select Storm Control.
The Storm Control List page is displayed. See Figure22.
Figure 22. Storm Control List Page
The following fields are displayed:
Port Id— Indicates the port number.
Broadcast— Indicates Broadcast packets are received, indicated
by “ON,” or not received, indicated by “OFF,” by the port. By
default, Broadcast packets are not received by a port.
Broadcast Level— Specifies the maximum number of ingress
packets per second of broadcast packets the port will forward. The
range is 0 to 33,554,431 packets. The default is 33,554,431
packets.
Multicast— Indicates Multicast packets are “ON” or “OFF” on the
port. By default, Multicast packets are not received by a port.