Chapter 9: Setting LACP
110
5. Select the Load Balance Method. Choose from the following:
Src MAC— Specifies source MAC address as the load distribution
method.
Dst MAC— Specifies destination MAC address.
Src-Dst MAC— Specifies source address/destination MAC
address.
Src IP— Specifies source IP address.
Dst IP— Specifies destination IP address.
Src-Dst IP— Specifies source address/destination IP address.
6. Select the member ports of the aggregator by clicking on the ports.
7. Click Add.
A confirmation message is displayed.
8. Click SAVE.