I N S T A L L A T I O N
ELECTRICAL CONNECTION
ELECTRICAL - 500-TH/III
voltage phase cycle/hz amps kW cord & plug
120 | 1 | 60 | 16.0 | 1.92 | nema |
|
|
|
|
| |
60 | 11.2 | 2.70 | cord, | ||
at 208 | 1 | 60 | 10.6 | 2.20 | no plug |
at 240 | 1 | 60 | 12.2 | 2.93 |
|
230 | 1 | 50 | 12.0 | 2.75 | cee 7/7 |
|
|
|
|
| |
|
|
| |||
ELECTRICAL - |
|
| |||
voltage | phase | cycle/hz | amps | kW | cord & plug |
60 | 15.8 | 3.80 | cord, | ||
at 208 | 1 | 60 | 14.6 | 3.04 | no plug |
at 240 | 1 | 60 | 16.9 | 4.05 |
|
230 (agcy) | 1 | 50 | 14.3 | 3.3 | cee 7/7 |
|
|
|
|
| |
|
|
| |||
|
|
| |||
ELECTRICAL - |
|
| |||
voltage | phase | cycle/hz | amps | kW | cord & plug |
60 | 15.8 | 3.8 | cord, | ||
at 208 | 1 | 60 | 14.4 | 3.0 | no plug |
at 240 | 1 | 60 | 16.7 | 4.0 |
|
230 | 1 | 50 | 14.3 | 3.3 | cee 7/7 |
|
|
|
|
| |
|
|
|
|
|
|
ELECTRICAL - |
|
| |||
voltage | phase | cycle/hz | amps | kW | cord & plug |
60 | 30 | 7.2 | no cord | ||
at 208 | 1 | 60 | 28.9 | 6.0 | or plug |
at 240 | 1 | 60 | 33.3 | 8.0 |
|
230 (agcy) | 1 | 50 | 28.7 | 6.6 | no cord or plug |
Wire diagrams are located inside the bonnet of the unit.
D A N G E R
APPLIANCES WITH NO CORD
PROVIDED BY FACTORY MUST
BE EQUIPPED WITH A CORD OF
SUFFICIENT LENGTH TO PERMIT
THE APPLIANCE TO BE MOVED
FOR CLEANING.
ELECTRICAL CONNECTIONS MUST
BE MADE BY A QUALIFIED SERVICE
TECHNICIAN IN ACCORDANCE WITH
APPLICABLE ELECTRICAL CODES.
TH/III installation/operation/service manual | pg. 13 |
