computer.
9.Ensure the EMU BRK jumper is not installed.
10.Open the Linux “minicom” application. Select the serial port attached to the development kit and configure the port for 115.2 kbps and 8N1 serial protocol. Power up the wall adapter. The terminal window will act as the controlling console for the NETdimm.
11.After booting up, the console will display a login prompt, as is shown below
/etc/issue | www.dimmpci.com | 2 April |
2002 |
|
|
Welcome to AMCTC’s dimmPCI running uClinux!
See the following web sites for more information:
www.dimmpci.com: information specific to the dimmPCI platform
www.uclinux.org: information and tools for generic uClinux
dimmPCI login:
12. Enter the username root and the password is blank, just press enter.
That’s it; the development kit will act like a normal linux system now and is ready to be used to develop powerful new embedded applications.
4 | www.amctechcorp.com |
