AMD 27493, 10, 27488 manual Maximum Typical, 68.3 W 53.7 W, 12.1 a, 74.3 W 58.4 W

Preliminary Information

26237C —May 2003 AMD Athlon™ XP Processor Model 10 Data Sheet

6Advanced 333 Front-Side Bus AMD Athlon™ XP Processor Model 10 Specifications

This chapter describes the electrical specifications that are unique to the advanced 333 front - side bus (FSB) AMD Athlon™ XP processor model 10.

6.1Electrical and Thermal Specifications for the Advanced 333 FSB AMD Athlon™ XP Processor Model 10

Table 1 shows the electrical and thermal specifications in the

C0 working state and the S1 Stop Grant state for this processor.

Table 1. Electrical and Thermal Specifications for the Advanced 333 FSB AMD Athlon™ XP Processor Model 10

Frequency in MHz	VCC_CORE	ICC (Processor Current)				Thermal Power		5	Maximum Die
				Stop Grant S11, 2, 3, 4
(Model Number)	(Core	Working State C0							Temperature
	Voltage)
		Maximum	Typical	Maximum	Typical	Maximum	Typical
1833 (2500+)
		41.4 A	32.5 A			68.3 W	53.7 W
1917 (2600+)	1.65 V			12.1 A	7.2 A				85°C
2083 (2800+)
2167 (3000+)		45.0 A	35.4 A			74.3 W	58.4 W

Notes:

1.See Figure 3, "AMD Athlon™ XP Processor Model 10 Power Management States" on page 9.

2.The maximum Stop Grant currents are absolute worst case currents for parts that may yield from the worst case corner of the process and are not representative of the typical Stop Grant current that is currently about one-third of the maximum specified current.

3.These currents occur when the AMD Athlon™ system bus is disconnected and has a low power ratio of 1/8 for Stop Grant disconnect and a low power ratio of 1/8 Halt disconnect applied to the core clock grid of the processor as dictated by a value of 2003_1223h programmed into the Clock Control (CLK_Ctl) MSR. For more information, refer to the AMD Athlon™ and

AMD Duron™ Processors BIOS, Software, and Debug Developers Guide, order# 21656.

4.The Stop Grant current consumption is characterized at 50°C and not tested.

5.Thermal design power represents the maximum sustained power dissipated while executing publicly-available software or instruction sequences under normal system operation at nominal VCC_CORE . Thermal solutions must monitor the temperature of the processor to prevent the processor from exceeding its maximum die temperature.

Chapter 6 Advanced 333 Front-Side Bus AMD Athlon™ XP Processor Model 10 Specifications 21