ADCC1100
Running Patterns
A pattern is a series of pan, tilt, zoom, and focus commands defined for a dome camera. A pattern is programmed in real time, which means that the dome remembers each pattern segment in the actual time it takes the operator to execute a command.
To run a pattern:
1.Press the OPERATOR tab key.
2.Call the camera that the pattern will run on.
3.Enter the pattern number (1 - 3) using the alphanumeric keys. The pattern number will appear next to ENTER on the keyboard's display.
4.Press the PATTERN soft key.
Selecting and Running a Macro
A macro is a series of keyboard inputs that is executed using a single keystroke. Macros are arranged on the keyboard display by means of icons and macro pages. Each macro page consists of eight icons arranged in two rows of four with each icon adjacent to a soft key (figure 3.5). The NEXT and PREVIOUS tab keys are used to select macro pages.
The macros that have been programmed for the switching system will be recorded by the system administrator.
Note: figure 3.5 shows a representation of a default macro page. During macro programming, it is possible to assign a different icon to each macro, and a different name to each macro page.
|
|
|
|
| Page 1 |
Macro | Monitor | Camera | Macro | Page 2 | |
One | Five | Page 3 | |||
|
|
|
|
| |
Macro |
|
|
| Macro | Page 4 |
Two |
|
|
| Six | Page 5 |
| Page One |
|
| ||
Macro |
| Macro | Page 6 | ||
|
|
| |||
Three |
|
|
| Seven | Page 7 |
|
|
|
|
| |
Macro | Enter |
|
| Macro | Page 8 |
Four |
|
|
| Eight |
|
Operator | Previous |
| Next |
| |
| Operator | Previous |
| Next |
|
|
| Operator | Previous | Next | |
Figure 3.5: Macro Pages
22
