Keyboard Installation and Operation
Programming Smart Cards
Smart card programming can be done in sections:
1.User codes, names, and partition information
2.Macro page and macro icon information
3.Macro function information
Smart card functions include:
•Read smart card - reads information on an existing smart card such as User name, User ID, Macro Group Name, Access Level, and Partitions.
•Program smart card - programs current keyboard information, or any information that has been read or edited from another smart card, to the smart card currently in the keyboard's smart card slot.
•Program macro - programs a smart card with the macro information which is currently active on the keyboard. Allows changes to macro page, and macro icons to be programmed to the smart card.
•Read Macro - reads an existing smart card's macros including macro page, and macro icon information. This can then be previewed using the keyboard prior to programming to another smart card.
Reading a Smart Card
A smart card with sufficient privileges must be first used in order to access the key- board's program mode.
1.Press the PROGRAM MODE tab key. Press the NEXT soft key.
2.Press the SMART CARD soft key. Press the READ SC soft key.
3.The keyboard will display the message "Please Replace Smart Card". Insert the smart card to be read and the display will change showing the information on the new smart
User | User Name: | Read | ||
Name | B o b S m i t h | SC | ||
|
| |||
User | User ID: |
| Prog | |
ID | 15 |
| SC | |
|
|
| ||
Macro | Macro Group: | Prog | ||
Name | Level 1 |
| Macro | |
|
|
| ||
Admin | Access Level: | Read | ||
O p e r a t o r | Macro | |||
| ||||
|
| |||
Operator | Program Mode | Macros | ||
Figure 4.5: Read Smart Card
33
