| If you want to … |
|
| Use … |
|
|
|
|
| ||
Auto Pan Left Limit |
|
| Run/Pgm switch to PGM |
| |
See Setting Left and Right Auto Pan Scan Limits on page |
|
| Enter 98 Enter |
| |
|
|
|
| ||
|
|
|
|
| |
Auto Pan Right Limit |
|
| Run/Pgm switch to PGM |
| |
See Setting Left and Right Auto Pan Scan Limits on page |
|
| Enter 99 Enter |
| |
|
|
|
| ||
|
|
|
|
| |
Auto Pan ON/OFF |
|
| Run/Pgm switch to RUN A/P |
| |
(LED indicates Auto Pan state: ON = Auto Pan is running.) |
|
| Toggles state |
| |
|
|
|
| ||
|
|
|
|
|
|
Operating the Dome Configuration Menu
The following table lists the commands to operate the configuration utility when the dome is installed in a Vicon environment.
If you want to … | Use … |
Start the configuration utility. | Run/Pgm switch to PGM |
| Enter 94 Enter |
Move the highlight bar on the active menu. | Tilt Up/Down |
Select the highlighted item on the active menu. | A/P or AUX5 |
Increase the value of the selected setting. | Pan Right (or Zoom In) |
For example, Red or Blue white balance values. |
|
Decrease the value of the selected field. | Pan Left (or Zoom Out) |
For example, Red or Blue white balance values. |
|
Display the next choice for the setting. For example, Maximum | Pan Right (or Zoom In) |
Zoom setting. |
|
Display the previous choice for the setting. For example, | Pan Left (or Zoom Out) |
Maximum Zoom setting. |
|
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in the selected languages. In these situations, the following commands are used:
If you want to … | Use … |
Move the highlight left or right in the character field. | Pan Left/Right |
|
|
Move the highlight up or down in the character field. | Tilt Up/Down |
Select the highlighted character in the character field. | A/P |
Move the cursor to the right of the current character in the | Pan Right (or Zoom In) |
name or password. |
|
Move the cursor to the left of the current character in the | Pan Left (or Zoom Out) |
name. |
|
Vicon Protocol Command Summary |