Pelco Command Summary
The following table lists the commands to operate the configuration utility when the dome is installed in a Pelco environment.
| If you want to … |
|
| Use … |
|
|
|
|
| ||
Start the configuration utility. |
|
| Set Preset 95 |
| |
|
|
|
|
| |
Move the highlight bar on the active menu. |
|
| Tilt Up/Down |
| |
|
|
|
|
| |
Select the highlighted item on the active menu. |
|
| Iris Open (or Focus) |
| |
|
|
|
|
| |
Increase the value of the selected setting. For example, Red or Blue |
|
| Pan Right (or Zoom In) |
| |
white balance values. |
|
|
|
| |
Decrease the value of the selected field. For example, Red or Blue |
|
| Pan Left (or Zoom Out) |
| |
white balance values. |
|
|
|
| |
Display the next choice for the setting. For example, Maximum |
|
| Pan Right (or Zoom In) |
| |
Zoom setting. |
|
|
|
| |
Display the previous choice for the setting. For example, Maximum |
|
| Pan Left (or Zoom Out) |
| |
Zoom setting. |
|
|
|
| |
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in the selected languages. In these situations, the following commands are used:
If you want to … | Use … |
Move the highlight left or right in the character field. | Pan |
|
|
Move the highlight up or down in the character field. | Tilt |
|
|
Select the highlighted character in the character field. | Iris Open (or Focus) |
|
|
Move the cursor to the right of the current character in the name or | Pan Right (or Zoom In) |
password. |
|
Move the cursor to the left of the current character in the name. | Pan Left (or Zoom Out) |
Additional Controller Commands
Use the following controller commands to perform these SpeedDome Ultra functions:
If you want to... | Use... |
Flip the dome 180° | Call Preset 33 |
Return to 0° pan | Call Preset 34 |
|
|
Turn IR Mode On | Set Preset 88 |
|
|
Turn IR Mode Off | Set Preset 89 |
|
|
Reset Dome | Set Preset 94 |
|
|
Pelco Coaxitron and “P” Protocols Command Summary |