American Dynamics manual 75

Supported Controllers and Matrix Switching Systems

This section provides information about the SensorNet and RS-422 controllers and matrix switchers that are compatible with SpeedDome Ultra VII. Refer to the controller information for details concerning specific functions supported.

Note: This list of controllers is complete as of the time of publication. Other controllers may be supported. Contact your Sales Representative for current information.

Controller/Switcher		Page Number	Controller/Switcher		Page Number
•	VM8	A–3	•	AD1650	A–4
•	VM16/ADTT16	A–3	•	AD168	A–4
•	VM16E/ADTT16E	A–3	•	AD2050	A–5
•	VM32/AD32	A–4	•	MegaPower LT	A–5
•	VM96	A–4	•	MegaPower 48	A–5
•	AD2150/AD2350	A–4	•	MegaPower 1024	A–5

VM8

Supported Protocol	SensorNet
Maximum Presets	0
Maximum Patterns (1)	1
Quick Set Menu	Not supported
Address Range	1-8
Notes:

(1)Apple Peel only. Programmable patterns are not available.

VM16/ADTT16 (White Touch Tracker)

Supported Protocols	SensorNet
	RS-422 (1)
Maximum Presets	96 – SensorNet
	4 – RS-422
Maximum Patterns (2)	3
Quick Set Menu	Not supported
Address Range	1-16

Notes:

(1)Requires RCSN422 code converter.

(2)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.

Total dome commands used in the all patterns cannot exceed 99.

VM16E/ADTT16E (Black Touch Tracker)

Supported Protocols	SensorNet
	RS-422 (1)
Maximum Presets	96 – SensorNet
	4 – RS-422
Maximum Patterns (2)	3
Quick Set Menu	Yes (3)
Address Range	1-16 or
	1-64(3)

Notes:

(1)Requires RCSN422 code converter.

(2)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.

Total dome commands used in all patterns cannot exceed 99.

(3)Requires firmware version 0701-2833-0103 (EEPROM) / 0701-2834-0201 (Flash PROM) or newer.

SensorNet and RS-422 Protocols Command Summary A–3