AD2050

Supported Protocol

RS-422 (1)

Maximum Presets

16

(2) or

 

60

(3)

Maximum Patterns (4)

3

 

Quick Set Menu

Not supported

Address Range

1-1024 (5)

Notes:

(1)Requires the AD2083-02 series code converter.

(2)Preset information is stored at the converter, not the dome.

(3)Requires AD2083-02 with firmware version 0701-11YB- 156A or newer. Preset information is stored in the dome, not the converter.

(4)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds. Total dome commands used in all patterns cannot exceed 99.

(5)Requires additional equipment to achieve these numbers. A dome address within each group of 64 or 99 cameras is reserved as a global broadcast address.

MegaPower LT

Supported Protocol

SensorNet

Maximum Presets

96

Maximum Patterns (1)

3

Quick Set Menu

Yes (2)

Address Range

1-32

Notes:

 

(1)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds. Total dome commands used in all patterns cannot exceed 99.

(2)Requires a compatible keyboard.

MegaPower 48

Supported Protocols

SensorNet

 

RS-422

Maximum Presets

96 (1)

Maximum Patterns (2)

3

Quick Set Menu

Yes (3)

Address Range

1-48

Notes:

(1)Preset information is stored at the host, not the dome.

(2)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.

Total dome commands used in all patterns cannot exceed 99.

(3)Requires firmware 1.07 or newer and a compatible keyboard.

MegaPower 1024

Supported Protocol

RS-422 (1)

Maximum Presets

16

(2) or

 

60

(3)

Maximum Patterns (4)

3

 

Quick Set Menu

Not supported

Address Range

1-1024 (5)

Notes:

(1)Requires the AD2083-02 series code converter.

(2)Preset information is stored at the converter, not the dome.

(3)Requires AD2083-02 with firmware version 0701- 11YB-156A or newer. Preset information is stored in the dome, not the converter.

(4)Patterns are limited by time and the number of available dome commands. Total time for each pattern cannot exceed 6 minutes 50 seconds.

Total dome commands used in all patterns cannot exceed 99.

(5)Requires additional equipment to achieve these numbers. A dome address within each group of 64 or 99 cameras is reserved as a global broadcast address.

SensorNet and RS-422 Protocols Command Summary

A–5