Table E-1: Quick Set Menu commands

Quick Set Command / Menu Item Description

 

 

Toggles between displaying and hiding the quick set

0+

: Toggle Quick Set Menu

menu.

 

 

Displays the SpeedDome Ultra configuration menu.

 

 

Refer to the dome manual for information about the

1+

: Dome Config Menu

available settings.

 

 

 

2+

: Auto Iris/Auto Focus

Resumes Auto Focus/Auto Iris mode.

 

 

 

 

 

Rotates the SpeedDome 180° from its current pointing

3+

: Flip

direction. This is the same as pressing the Flip button.

4+

: Peel Pattern

Runs the default Apple Peel Pattern continuously.

 

 

 

 

 

Initiates a smooth scan between the left and right scan

 

 

limits, starting at the left scan limit. If no scan limits

 

 

have been set, initiates a smooth 360° clockwise

 

 

rotation around the dome axis using the current tilt,

15+

: Smooth Scan

zoom and focus settings.

 

 

 

 

 

Initiates a scan between the left and right scan limits

 

 

pausing briefly every 10° (at 1x zoom), starting at the

 

 

left scan limit. When the right scan limit is reached,

 

 

the scan is reversed. If no scan limits have been set,

 

 

initiates a clockwise rotation around the dome axis

 

 

pausing briefly every 10° (at 1x zoom) for 3 seconds

16+

: Stepped Scan

using the current tilt, zoom and focus settings.

 

 

Initiates a scan between the left and right scan limits

 

 

pausing randomly between the limits. If no scan limits

 

 

have been set, initiates a clockwise or counter-

 

 

clockwise rotation around the dome axis using the

 

 

current tilt, zoom and focus settings. The dome pauses

17+

: Random Scan

randomly as it rotates around the axis.

Displays the Dome Information screen available

20+ : Dome Information through the dome configuration menu.

Note: You can access any quick set feature by entering the menu number and pressing .

After a selection is made, the Quick Set menu automatically closes. To close the menu without

selecting a menu item, press .

AD Up-the-Coax (UTC) Protocol Command Summary

E–5