Command Summary
The following table lists the commands to operate the configuration utility when the dome is installed in a Manchester environment. The keyboard must be in programming mode to perform these functions.
If you want to … | Use … |
|
|
Start the configuration utility. | 66, then press |
| Set Preset1 |
Move the highlight bar on the active menu. | Pan/Tilt |
|
|
Select the highlighted item on the active menu. | Focus |
|
|
Increase the value of the selected setting. For example, Red or Blue | Zoom In |
white balance values. |
|
|
|
Decrease the value of the selected field. For example, Red or Blue | Zoom Out |
white balance values. |
|
|
|
Display the next choice for the setting. For example, Maximum | Zoom In |
Zoom setting. |
|
|
|
Display the previous choice for the setting. For example, Maximum | Zoom Out |
Zoom setting. |
|
|
|
Save changes and exit the utility from any screen. | Iris Close, then Focus |
|
|
Setting Names / Working with Passwords
When setting names or entering password information, the screen displays the available characters in the selected languages. In these situations, the following commands are used:
If you want to … | Use … |
|
|
Move the highlight left or right in the character field. | Pan |
|
|
Move the highlight up or down in the character field. | Tilt |
|
|
Select the highlighted character in the character field. | Focus |
|
|
Move the cursor to the right of the current character in the name or | Zoom In |
password. |
|
|
|
Move the cursor to the left of the current character in the name. | Zoom Out |
|
|
1The label may read Set Shot on some keyboards.
SpeedDome Ultra VII Operator's Manual |