External Connection
4.6Connecting of APC Silcon Tripel Chassis
The enclosed Triple Chassis must be connected to the serial port on the Communication Interface Board, and to the 24V supply (cables included). Terminal locations shown below.
Part of UPS Cabinet
X50 is a 24V supply for Triple Chassis.
Only to be used for this purpose.
Not suitable for telephone equipment.
Triple Chassis must be connected to both
X50 and a serial port.
Serial ports
X50
APC Silcon Triple Chassis
X007 X008
For more information please refer to the following section.
| |
|
|
Installation Guide APC Silcon | 19 |
