AMT Datasouth ACCEL-6300 15) CELL: 10, 16) LPI: 10, 18) ITALICS:Off, 17) COLOR:Black, 15) CELL: 10, 16) LPI: 10, 17) COLOR:Black

User's Guide

4-26 Control Panel

Set Character Cell Size

CELL lets you specify how much to expand or compress characters so

that they look good when printed at the selected pitch. You can select

the same settings as for PITCH; that is, 10, 12, 13.3, 15, 17.1, 20 or

PS (proportional spacing). To select a setting, consider the following:

9Using the same setting for CELL and PITCH yields the

best results.

9Using a lower setting for CELL than for PITCH can result in

characters that overlap.

9Using a higher setting for CELL than for PITCH can result in

wide gaps between characters.

Set Number of Lines Per Inch

LPI lets you specify how many lines to print per inch. You can select

2, 3, 4, 5, 6, 8, 9, 10 or 12 lines per inch. If the current setting is

Other, then your software application has set the number of lines per inch

to some nonstandard value.

Set Color

COLOR lets you specify a color for printing. You can select Black,

Cyan (light blue), Mgnta (magenta), Yellw (yellow), Violt (violet),

Green or Orang (orange). If a monochrome ribbon is installed, the

printer ignores your color selection.

Turn Italic Mode On and Off

ITALICS lets you turn the italic mode on and off. In the italic mode,

characters slant to the right by about 20%. You can select On or Off.

15) CELL: 1016) LPI: 10

ABCDEFGHIJKLMN

17) COLOR:Black18) ITALICS:Off