AMX DAS-SIRIUS Connecting and Positioning the Sirius Antenna, Activating Your Sirius Subscription

DAS-SIRIUS Tuner Module

Connecting and Positioning the SIRIUS Antenna

1.Connect the provided SIRIUS Antenna to the DAS-SIRIUS (see FIG. 1).

2.Verify the Signal strength

a.Access the programming menus via the front of the Controller.

b.Select Setup\SIRIUS.

c.Select "Status". In this menu, you can check the following:

"ANT = Antenna Status"

"ACT = Activation Status"

"SAT = Satellite Signal"

"TER - Terrestrial Signal"

d.Select "SAT" to determine the Satellite Signal Strength. Values are "None", "Weak" and "Good".

e.Ensure the signal strength is at a minimum of "weak". Adjustments may need to be made to the position of the Antenna in order to get a better signal.

Activating Your SIRIUS Subscription

SIRIUS Satellite Radio is a subscription service. In order to use your DAS-SIRIUS module, you will have to activate your SIRIUS subscription.

Until you have activated your subscription, you will only be able to tune to channels 0 and 184.

1.Once you have installed the DAS-SIRIUS module, you can activate your SIRIUS subscription by phone: Call 1.888.539.SIRIUS (7474).

2.You will be asked for a “Sirius ID”. This ID can be found in several places:

If using a Matrix LCD keypad, select channel "0" to display the Sirius ID.

If using either a Metreau or Matrix tactile keypad with the optional numeric keypad, select channel "0". The Sirius ID will be displayed on the LCD display on the front of the Controller.

If using either a Metreau or Matrix tactile keypad without the optional numeric keypad, access the programming menus via the front of the Controller by pressing the centre Nav button on the Controller: Select Setup\SIRIUS, then select "ID" from the SIRIUS menu, and the SIRIUS ID will be displayed.

8 DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers