Installation & Setup

2.Attach a cable to the Sync Out connector on the primary enclosure (FIG. 24).

Primary Enclosure

Secondary Enclosure

Secondary Enclosure

with Control Panel

 

 

Flip appropriate

Flip appropriate

VIS toggle switches

VIS toggle switches

(see below)

 

 

From external

 

 

sync source

 

FIG. 24 Sync signal routed to multiple enclosures

3.Attach the other end of the cable to the Sync In connector on the second enclosure.

4.For all additional video enclosures, cable the Sync Out connectors to the Sync In connectors.

5.Flip the appropriate VIS toggle switches on each enclosure to the left for “on” and right for “off” according to the information provided below.

VIS Toggle Switches

The VIS toggle switches on the rear of the primary enclosure must be set to agree with the type of signal used for Vertical Interval Sync. On any secondary enclosure(s), the TTL toggle switch is the only VIS switch set to “on.”

Note: The top toggle switch, labeled SVC, is the Service switch (page 36). This switch must be set to the right for normal operation.

75 Ω (Termination)

BB (Blackburst)

INV (Inverted) set to “off” at all times

TTL (Transistor-Transistor Logic)

FIG. 25 VIS toggle switches

Primary Enclosure

The setting for the VIS toggle switch on the primary enclosure (the one with the control panel) depends on the type of external sync source.

If the external sync source is a Blackburst generator or NTSC composite video, set the BB (Blackburst) switch to “on” (be sure the TTL switch is “off”).

If the external sync signal is a TTL composite sync input, set the TTL switch to “on” (be sure the BB switch is “off”).

Note: If you need to provide a 75 ohm load for the external source, set the 75 ohm switch on the primary enclosure to “on” to provide the load. (When the 75 ohm switch is “off,” the input is terminated at high-impedance.)

Octaire Instruction Manual

33

 

 

Page 38
Image 38
AMX Octaire instruction manual VIS Toggle Switches, Primary Enclosure

Octaire specifications

The AMX Octaire is a remarkable aircraft designed to meet the evolving demands of modern aviation. Renowned for its combination of advanced technology, efficiency, and versatility, the Octaire stands out in the realm of business jets and regional transport.

One of the main features of the AMX Octaire is its sleek aerodynamic design, which not only enhances aesthetics but significantly contributes to fuel efficiency. The aircraft's fuselage is built using advanced composite materials, which reduce weight while maintaining structural integrity. This results in improved performance and operational costs, making the Octaire an attractive option for companies and individuals seeking economical flying solutions.

Powered by two state-of-the-art turbofan engines, the AMX Octaire is capable of reaching an impressive cruising speed while optimizing fuel consumption. These engines are equipped with next-generation noise reduction technologies that conform to stringent environmental regulations, minimizing the aircraft's carbon footprint and contributing to sustainable aviation practices.

The cockpit of the Octaire features cutting-edge avionics, including multifunction displays and an intuitive interface for pilots. This technology enhances situational awareness and simplifies navigation, allowing for a smoother flight experience. The integration of fly-by-wire controls ensures precision handling and improved safety, making the Octaire a reliable choice for both seasoned pilots and newcomers.

Passenger comfort is a top priority in the design of the AMX Octaire. The cabin is spacious and customizable, featuring luxurious seating arrangements, modern entertainment systems, and advanced climate control. High-capacity windows provide ample natural light, creating an inviting atmosphere that enhances the onboard experience. With soundproofing materials expertly incorporated into the design, passengers can enjoy a serene environment during their journeys.

Versatility is another hallmark of the AMX Octaire. It can be adapted for various roles, including business travel, medevac missions, and cargo transport. This flexibility ensures that the Octaire can meet the needs of a diverse clientele, from corporate executives to humanitarian organizations.

In summary, the AMX Octaire is a sophisticated aircraft that embodies efficiency, comfort, and technological advancement. Its design and features position it as a leader in the aviation market, promising to deliver exceptional performance for years to come. Whether used for business or specialized operations, the Octaire is poised to redefine expectations in air travel.