Overview & General Specifications
Input & Output Connectors
Service Access Spacing between connectors (twice the space for easy cable connections)
Input connectors
Output connectors
FIG. 6 Input & output connectors
Viewed from the rear of the enclosure, the connectors span the center from the power receptacles to the control area with the inputs on the top with the outputs directly below. Input and output connectors are the attachment points for source and destination devices that connect to the system. The rear of each enclosure is populated with connectors for a single signal type (for configuration sizes, see the “Applicability Notice” on page 7 through page 9). Inputs and outputs are numbered separately. The numbers are above each connector and read left to right, continuing on the next row of connectors. All video connectors are BNC, and audio connectors are
For cabling and wiring information for each signal type, see page 21. For signal specifications, see page 39.
General Specifications
Specifications
Approvals | CE, UL, cUL | |
|
| |
AC Power | 100 to 240 VAC single phase (50 to 60 Hz) | |
| 3.3 A @ 115 VAC max. | |
| 1.6 A @ 230 VAC max. | |
|
|
|
Power Consumption (max.) | 260 | W per enclosure |
|
|
|
Power Consumption (typical) | 120 | W per enclosure, fully loaded |
|
| |
Operational Temperature | 32° to 113° F (0° to 45° C) | |
|
|
|
Thermal Dissipation (max.) | 887 | BTU/hour |
|
|
|
Thermal Dissipation (typical) | 409 | BTU/hour, fully loaded enclosure |
|
| |
Humidity | 0 to 90% | |
|
| |
Enclosure Dimensions | Approximately 12.0 in. (30.5 cm) depth (including connectors) | |
| 18.9 in. (48.0 cm) width with mounting ears | |
| 17.4 in. (44.2 cm) width without mounting ears | |
| 6.95 in. (17.65 cm) height, 4 RU | |
|
| |
Weight | Approximately 20 lbs. (9.07 kg) per enclosure (depending on configuration) | |
| Approximately 24 lbs. (10.89 kg) packaged for shipping | |
|
|
|
Octaire Instruction Manual | 13 |
|
|