![Ultra-Wideband Video](/images/new-backgrounds/124400/12440089x1.webp)
Signal Types & Specifications
Ultra-Wideband Video
Ultra-Wideband (RGBHV) Signal Specifications
Frequency Response | Fully loaded | ±3 dB, >600 MHz average |
| Fully loaded | ±3 dB, 500 MHz or better |
| Fully loaded | ±1.5 dB, 150 MHz or better |
|
|
|
Crosstalk | f = 1 MHz | |
| f = 5 MHz | |
| f = 10 MHz | |
| f = 30 MHz | |
| f = 100 MHz | |
| f = 150 MHz | |
|
|
|
Signal to Noise Ratio | Vin = 0.7 V, 100 IRE | >65 dB |
|
|
|
Return Loss | f = 5 MHz | |
|
|
|
Input Level (max.) |
| ±1.0 V |
|
|
|
Input Impedance |
| 75 ohms |
|
|
|
Output Level (max.) |
| ±1.0 V |
|
|
|
Output Impedance |
| 75 ohms |
|
|
|
Connectors |
| BNC |
|
|
|
Sync
Sync Signal Specifications
Input Level Signal Range |
| 0 to +5 Volts |
|
|
|
Input Impedance |
| 510 ohms |
|
|
|
Input Trigger Voltage* |
| +1.75 V |
|
|
|
Input Polarity | Output polarity follows input polarity | Active high or low |
|
|
|
Output Level Signal Range |
| 0 to +5 Volts |
|
|
|
Output Impedance |
| 50 ohms |
|
|
|
Output Polarity | Output polarity follows input polarity | Active high or low |
|
|
|
Connectors |
| BNC |
|
|
|
*The input trigger voltage specification indicates the point which determines if the HV sync pulse is high or low. An incoming sync signal below +1.75 V will be interpreted as low, and an incoming sync signal above +1.75 V will be interpreted as high.
40 | Octaire Instruction Manual |