Hardware and
software
requirements
The Interface Expander requires:
•An APC device equipped with a SmartSlot accessory slot. SmartSlot devices include — but are not limited to — the APC UPSs in the next item.
•An APC UPS of one the following models:
–Smart- UPS® , except models AP250, AP400, AP600, AP900, AP1250, AP2000, SUVS420, SUVS650, SUVS1000, SUVS1400, SU620.
–Matrix- UPS™ , except models with serial numbers less than x9412.
– Symmetra ™ PowerArray™ .
•APC PowerChute software (simple signaling) or PowerChute plus (advanced or simple signaling) soft- ware. See “Simple versus smart signaling: Table 3” on page 7.
•A serial cable (for each connected device) that moni- tors shutdown signals. See “Choosing cables: Table 1” on page 4.
Continued on next page
3
