MANUAL V1.0 | usb CONNECTIONs > p. 39 |
A
To connect a USB device to your ARCHOS device:
1.Turn on your ARCHOS device.
2.Plug the ‘mini’ end of the supplied USB host adapter into the ARCHOS device (A port).
3.Connect the external USB device (use a standard USB cable if needed) to the other end of the supplied USB host adapter.
4.Turn on the external USB device if needed (check the documentation of your external USB device).
5.A double browser window will appear on the ARCHOS: the external USB device will appear in the left panel, and your ARCHOS device’s hard drive in the right panel.
6.Follow the instructions in the Copying and moving files section to copy your pictures or files to the ARCHOS.
To disconnect:
Make sure that no transfer is being made (the HDD light should not be flickering) and simply pull out the USB cable on either end.
Note 1: you may not always be able to copy files to your external USB device from your ARCHOS.
Note 2: you cannot connect your ARCHOS to a computer and connect an external device to your ARCHOS at the same time.
