Argosy Research H-125 Series owner manual Spacer Stack Assembly

DRIVE CAP ASSEMBLY, DOWN FLOW PISTON, REGENERANT PISTON AND

SPACER STACK ASSEMBLY

DRAWING NO.	ORDER NO.	DESCRIPTION		QUANTITY
1	151-V3430	H125	Spacer Stack Assembly	1
2	15-V3004	Drive Cap Assembly		1
3	15-V3343	H125	Drive Back Plate	1
4	151-V3407	H125	Piston Downflow Assy	1
5	15-V3174	Regenerant Piston		1
6	15-V3135	O-ring 228		1	3
7	15-V3180	O-ring 337		1
8	151-V3358	O-ring 219 (Dist. Tube Opening 1.32")		1

Note: The regenerant piston is not used in backwash only application.

1

4b

2

5

4a

7

6 8

INJECTOR CAP, INJECTOR SCREEN, INJECTOR, PLUG AND O-RING

DRAWING NO.	ORDER NO.	DESCRIPTION	QUANTITY
1	15-V3176	Injector Cap	1
2	15-V3152	O-ring 135	1
3	15-V3177	Injector Screen	1
4	15-V3010-1Z	Injector Assembly Z Plug	1
	15-V3010-1A	Injector Assembly A Black
	15-V3010-1B	Injector Assembly B Brown
	15-V3010-1C	Injector Assembly C Violet
	15-V3010-1D	Injector Assembly D Red
	15-V3010-1E	Injector Assembly E White
5	15-V3010-1F	Injector Assembly F Blue	1
	15-V3010-1G	Injector Assembly G Yellow
	15-V3010-1H	Injector Assembly H Green
	15-V3010-1I	Injector Assembly I Orange
	15-V3010-1J	Injector Assembly J Light Blue
	15-V3010-1K	Injector Assembly K Light Green
Not Shown	15-V3170	O-ring 011
Not Shown	15-V3171	O-ring 013

*The injector plug and the injector each contain one 011 (lower) and 013 (upper) o-ring.

Note: For upflow position, injector is located in the up hole and injector plug is in the other hole. H125 upflow bodies are identified by having the DN marking removed. For a filter that ony backwashes, injector plugs are located in both holes.











24