RELAY 1 SET POINT
SET REGENGAL
If REGEN gallons chosen to activate relay. Relay activates after set number of gallons have been used in service and if any water is used during regeneration and then deactivates after set period of time or after flow stops, whichever comes first. Press NEXT to select num- ber of gallons per relay activation.
RELAY 1 SETPOINT | Step 18S | |
SET | 1 GAL |
|
| |
|
RELAY 1 DURATION | Step 19S | |
SET | 0:01 MIN |
|
| |
|
RELAY 2 TRIGGER
SET TIME
RETURN TO ROTATING DISPLAY
STEP 18 S – Use up and down arrows to set number of gallons per relay activation. Range
STEP 19 S – Use up and down arrows to set duration of relay activation in minutes. Range: 1 second - 500 minutes. Press NEXT to go to Relay 2 Trigger.
Relay 2 programming includes identical options as Relay 1.
SERVICE ALARM
SET BOTH
SCHEDULED SERVICE SET 0.25 YR
Service REMINDER
Step 20S STEP 20S – Set scheduled service alarm using or buttons. Available options are OFF, TIME, ON GAL or BOTH. Selecting OFF disables this feature. If OFF is selected press NEXT to exit System Setup. If TIME, ON GAL or BOTH is selected press NEXT to select the TIME and/or ON GAL values. See Steps 21S and/or 22S. Press REGEN to return to the previous step.
Step 21S STEP 21S – Service alarm for TIME ranges from 0.25 to 9.75 years. Use or buttons to select value. Press NEXT to either exit System Setup or if BOTH was selected go to Step 22S. Press REGEN to return to the previous step.
SCHEDULED SERVICE | Step 22S |
SET 80000 GAL |
|
|
|
RETURN TO ROTATING DISPLAY
STEP 22S – Service alarm for ON GAL ranges from 100 to 9,999,900 gallons. Use
or buttons to select value. Press NEXT to exit System Setup. Press REGEN to return to the previous step.
12
