Argosy Research H-125 Series owner manual Water meter and meter plug, Bypass valve

water meter and meter plug

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-V3151	Nut 1” QC	1
2-4	15-V3003*	Meter Assy.	1
3	15-V3118-01	Turbine Assy.	1
4	15-V3105	O-ring 215	1
5	15-V3003-01	Meter Plug Assy.**	1

*Order number 15-V3003 includes 15-V3118-01 and 15-V3103, which are item numbers 3 & 4.

**Only used if metering is not to be done (time clock units)

The nuts and caps are designed to be unscrewed or tightened by hand or with the special plastic wrench. If necessary a pliers can be used to un- screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or caps. Do not place screwdriver in slots on caps and/or tap with a hammer.

￿

￿

￿

￿

￿

bypass valve

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
Not Shown	15-V3191-01	Bypass 90º Vert. Assy.
1	15-V3151	Nut 1” Quick Connect	2
2	15-V3150	Split Ring	2
3	15-V3105	O-Ring 215	2
Not Shown	15-V3191-01	Bypass Vertical Adpt.Assy (set of 2)	1

The nuts and caps are designed to be unscrewed or tightened by hand or with the special plastic wrench. If necessary a pliers can be used to un- screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or caps. Do not place screwdriver in slots on caps and/or tap with a hammer.

Do not use pipe dope or other sealants on threads. Teflon tape must be used on threads of the 1” NPT connection and on the threads for the drain line connection. Teflon tape is not necessary on the nut connection nor caps because of o-ring seals.

Figure 20

Figure 21

27