JVC KD-DV5000 manual Storing DAB services in memory, Start searching for an ensemble

ENGLISH

2 Start searching for an ensemble.

Press ¢	to search
for ensembles of higher
frequency.

Press 4 to search for ensembles of lower frequency.

When an ensemble is received, searching stops.

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

3 Select a service (either primary or secondary) you want to listen to.

Press 5 (up) to select the

next service. (If a primary

service has some secondary services, they are selected before the next primary service is selected.)

Press ∞ (down) to select the previous service (either primary or secondary).

To tune in to a particular ensemble without searching

Before you start....

1Press SRC repeatedly to select DAB tuner as the source.

2Press and hold SRC repeatedly to select the DAB band (DAB1, DAB2, or DAB3).

3Press ¢ or 4 repeatedly until the ensemble you want is reached.

•If you hold down the button, the frequency keeps changing until you release the button.

4Press 5 (up) or ∞ (down) to select a service (either primary or secondary) you want to listen to.

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2, and DAB3) manually.

1 Select the DAB tuner.

1Press SRC (source)

SRC	repeatedly to select the DAB
	tuner.

2Press and hold SRC. Each time you press and hold the button, the DAB band changes as follows:

DAB1 DAB2 DAB3

Notes:

•This receiver has three DAB bands (DAB1, DAB2, DAB3). You can use any of them to tune in to an ensemble.

•When using the remote controller, press and hold FM (DAB). Each time you press the button, the DAB tuner and the FM tuner is selected alternately.

2 Tune in to an ensemble you want.

3 Select a service of the ensemble you want to listen to.

Press 5 (up) to select the next service.

Press ∞ (down) to select the previous service.

74