JVC KD-DV5000 manual Basic Operations, Turning on the power, To drop the volume in a moment

BASIC OPERATIONS

ENGLISH

SRC

ATT							MODE	DISP
SEL	1	2	3	4	5	6	M	D	T/P

2 1, 3

Turning on the power

1 Turn on the power.

ATT

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

2 Select the source.

	Each time you press the button,
SRC
	the source changes as follows.
	TUNER			DAB	*1		DISC	*2
			*1			*3
		CD-CH or LINE IN
		(CD changer)

*1 Without connecting the DAB tuner or CD changer, you cannot select it as the source to play.

*2 If a disc is not in the loading slot, you cannot select “DISC” as the source to play.

*3 To select “LINE IN,” select “Line In” for the “Ext Input” setting on page 60.

3 Adjust the volume.

ATT

Volume level appears.

Current sound (iEQ) mode (see page 55)

4 Adjust the sound as you want. (See pages 54 – 56.)

Note:

While playing a source, you can also show the level meter on the display. For details, see “Activating the level meter” on page 10.

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

•If you turn the control dial, you can also restore the sound.

To turn off the power

Press for more than 1 second.

• If you turn off the power while listening to a

disc, playback will start from where playback

has been stopped previously, next time you

turn on the power.

8