SOUND ADJUSTMENTS

ENGLISH

Operations of this section are explained using the buttons on the control panel unless mentioned otherwise.

Adjusting the sound

You can adjust the sound characteristics to your preference.

“Vol Adj” setting is required for each source except FM. Before starting “Vol Adj,” select an appropriate source for which you want to make an adjustment.

2 Make adjustments.

To adjust fader and balance—Fad, Bal: You can make these two adjustments at the same time, by referring to the indication on the display.

• Press 5 (up) or (down) to adjust the fader.

Press ¢ or 4 to adjust the balance.

1 Press SEL (select) repeatedly to show one of the basic sound setting (SEL) screens.

Each time you press the button,

SEL

the adjustable items change as

 

 

follows:

iEQ

 

 

Fad/Bal

 

 

 

Vol Adj

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Basic sound settings

 

 

 

 

 

 

Canceled

 

 

 

 

 

 

 

 

 

 

 

 

 

 

METER

 

 

 

For iEQ (sound mode) settings, see pages 55 and 56.

For METER (level meter) settings, see page 10.

Note:

You can also use the SEL button on the remote controller to call up the fader/balance

Note:

You can also use the ¢ or 4 buttons and FOLDER PRESET 5(up) or FOLDER PRESET (down) on the remote controller for adjustment.

To adjust the input level of each source —Vol Adj:

This setting is required for each source except FM. Before making an adjustment, select an appropriate source for which you want to make an adjustment.

Once you have made an adjustment, it is memorized, and you will not need to adjust the volume level each time you change the source.

Adjust to match the input level to the FM sound level.

adjustment screen.

Indication

To do:

Range

Fad*

Adjust the front

R06 (Rear only)

 

and rear speaker

 

balance.

F06 (Front only)

 

 

 

Bal

Adjust the left

L06 (Left only)

 

and right speaker

 

balance.

R06 (Right only)

 

 

 

Vol Adj

Adjust and store

–12 (min.)

 

the input level

 

of each source.

+12 (max.)

 

 

 

*If you are using a two-speaker system, set the fader level to “00.”

ATT

To increase the level

To decrease the level

54

Page 54
Image 54
JVC KD-DV5000 manual Sound Adjustments, Adjusting the sound, Make adjustments, Meter