JVC KD-DV5000 manual Output signals through the Digital OUT terminal, Digital Audio OUT, MP3

	Symptoms		Causes	Remedies
•	“No Disc” flashes on the	No disc is in the magazine.		Insert discs into the magazine.
	display.
		Discs are inserted upside down.		Insert discs correctly.
		Discs are unplayable.		Insert playable discs.
		The current disc does not		Insert a disc that contains
		contain any MP3 files.		MP3 files.
•	“No Magazine” flashes on	No magazine is loaded in the		Insert the magazine.
	the display.	CD changer.			Changer
•	“Reset 8” flashes on the	This unit is not connected to the		Connect this unit and the
	display.	CD changer correctly.		CD changer correctly and
				press the reset button on the	CD
				CD changer.
•	“Reset 1” – “Reset 7”			Press the reset button on the
	flashes on the display.			CD changer.
•	The CD changer does not	The built-in microcomputer may		Press the reset button on the
	work at all.	function incorrectly due to		panel holder after detaching
		noise, etc.		the control panel. (The clock
				setting and preset stations
				stored in memory are
				erased.) (See page 2.)

ENGLISH

Output signals through the DIGITAL OUT terminal

They differ depending on the “DIGITAL AUDIO OUT” setting on the Setup Menu.

DIGITAL AUDIO OUT		Output Signals
Playback Disc	PCM ONLY	DOLBY DIGITAL/PCM	STREAM/PCM
DVD 48 kHz, 16/20/24 bit Linear PCM		48 kHz, 16 bit Linear PCM *
96 kHz, Linear PCM		None
with Dolby Digital	48 kHz, 16 bit Linear PCM	Dolby Digital bitstream
with DTS	48 kHz, 16 bit Linear PCM		DTS bitstream
with MPEG Multichannel	48 kHz, 16 bit Linear PCM		MPEG bitstream
Video CD, Audio CD		44.1 kHz, 16 bit Linear PCM
Audio CD with DTS	44.1 kHz, 16 bit Linear PCM		DTS bitstream
MP3		Linear PCM

*While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not copy-protected.

83