JVC KD-DV5000 manual Storing your own sound, Adjustments

	Storing your own sound
ENGLISH
	adjustments
	You can adjust the sound modes to your
	preference and store your own adjustments in
	memory (User 1, User 2, and User 3).
	• There is a time limit in doing the following
	procedure. If the setting is canceled before you
	finish, start from step 1 again.
	1 Press SEL (select) once to show the
	sound selection screen.
			Last selected sound mode is
		SEL
			called up.

4 Make adjustments as you like.

1)Press ¢ or 4 to select the frequency band—60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz.

2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of –05 to +05.

3)Repeat steps 1) and 2) to adjust the other frequency bands.

5 Store the adjustment you made.

Ex.: When you have selected “Country” previously

2 Select the sound mode you want to adjust.

SEL

The confirmation message

appears—whether you want to store the adjustment.

1 2 3 4 5 6

•This unit has two sound mode selection screens. To move to the other screen, press 5 (up) or ∞ (down).

3 Enter the sound adjustment mode.

The following sound mode adjustment screen appears on the display.

If you want to cancel the adjustments,

press DISP (D).

•Adjustment you made remains effective until you select another sound mode.

6 Select one of the user sound modes (User 1, User 2, or User 3) you want to store into.

1 2 3 4 5 6

Ex.: When you select “User 1”

56