JVC KD-DV5000 manual Basic Disc Playback, Starting playback, Open the control panel

BASIC DISC PLAYBACK

ENGLISH

SRC

ATT

SEL 1 2 3

The following marks used in this manual indicate

the playable discs.

DVD Video	Video CD	Video CD
	with/without PBC	with PBC
Audio CD	MP3 disc	All discs
		listed here

Before performing any operations, make sure

the following....

•Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control the CD and MP3 playback by referring to the monitor screen.

•For DVD playback, you can change the Setup Menu setting to your preference. (See pages 50 – 53.)

•When you want to operate the DVD/CD player using the buttons on the control panel, see “OTHER DISC OPERATIONS” on pages 42 to 49.

If “ ”appears on the monitor when

pressing a button, the disc cannot accept an operation you have tried to do.

• In some cases, without showing “ ,” operations will not be accepted.

			MODE	DISP
4	5	6	M	D	T/P

Starting playback

1 Open the control panel.

Disc loading lamp

2 Insert a disc into the loading slot.

The disc loading lamp start flashing, and the unit draws in the disc automatically.

DO NOT insert a disc while the disc loading lamp is flashing* or is not lit**.

*Flashing: while loading or ejecting a disc **Not lit: when a disc has been loaded.

3 Close the control panel by hand.

The disc type is automatically detected, and playback starts automatically. (If a disc is CD, VCD without the PBC function, or MP3, playback will be repeated until you stop it.)

•If a menu appears while playing a DVD or VCD with PBC function, see “Menu operations” on page 31.

26