ENGLISH

Searching for a station manually: Manual search

1 Select the band (FM1 – 3, AM).

1Press SRC (source)

SRC

repeatedly to select the tuner.

2Press and hold SRC.

Each time you press and hold the button, the band changes.

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “Manual Search” starts flashing on the display.

3 Tune in to a station you want while “Manual Search” is flashing.

To tune in to stations of higher frequencies

To tune in to stations of lower frequencies

If you release your finger from the button, the manual mode automatically turns off after 5 seconds.

If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM—MW/LW) until you release the button.

When an FM stereo broadcast is hard to receive:

MODE

1Press MODE (M) to enter the

functions mode while listening to

M

an FM stereo broadcast.

 

“Mode” appears on the display.

 

2Press number button 1 to select “Mono On” while “Mode” is still on the display.

Each time you press the button, “Mono On” and “Mono Off” appears alternately.

See page 40 for this function.

1

2

3

4

5

6

After about 5 seconds

The display returns to the source indication

screen.

When “Mono On” is selected, the MONO indicator appears, and the sound you hear becomes monaural but the reception will be improved.

12

Page 12
Image 12
JVC KD-DV5000 Searching for a station manually Manual search, When an FM stereo broadcast is hard to receive