JVC KD-DV5000 manual Selecting a preset station directly

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 13 and 14.

Selecting a preset station directly

1 Select the band (FM1 – 3, AM).

1Press SRC (source)

SRC

repeatedly to select the tuner.

2Press and hold SRC.

Each time you press and hold the button, the band changes.

FM1 FM2 FM3 AM

2 Select the number (1 – 6) for the preset station you want.

1 2 3 4 5 6

When using the remote controller

1 Press FM (DAB) or AM.
• When selecting the FM bands,	FM
press FM (DAB) repeatedly	DAB
until the band you want is	AM
selected.

2Press the number buttons (1 to 6) while holding SHIFT (S).

SHIFT	TOP		MENU
S	MENU
	1	2	3
		DISC +
		ENTER
	4	5	6

Note:

You can also use the PRESET (FOLDER) 5/ ∞ buttons for selecting a preset station.

Selecting a preset station using the preset station list

If you forget which stations are stored in which preset numbers, you can check the preset station list, then select your desired station.

1 Select the band (FM1 – 3, AM).

1Press SRC (source)

SRC repeatedly to select the tuner.

2Press and hold SRC.

Each time you press and hold the button, the band changes.

FM1 FM2 FM3 AM

2 Press and hold 5 (up) or ∞ (down) until the preset station list for the current band (FM1, FM2, FM3, or AM) appears on the display.

Notes:

•If one of FM band preset station lists (FM1, FM2, or FM3) is shown on the display, you can show the other lists by pressing 5 (up) or ∞ (down).

•If a preset station is an FM RDS station with PS signal, PS name will be shown instead of the station frequency.

3 Select the number (1 – 6) for the preset station you want.

1 2 3 4 5 6

ENGLISH

15