Asante Technologies Voyager II Basic Setting > Network (Network setting) ,

Basic Setting > Network (Network setting)

 Basic Setting > Network > Network > IP Assignment

DHCP setting:

DHCP(Dynamic Host Configuration Protocol) is a protocol that enables automatic

assignment of TCP/IP information to the client. Each DHCP client conn ects to the

DHCP server to access its network setting information, including IP address, gateway,

and DNS server.

The IP address of the camera is 192.168.0.20 by default when DHCP is "OFF". When

you select "DHCP ON" and access to the DHCP network environment, t he camera

will automatically s end a DHCP packet to request an IP address. This IP address is

assigned automatically from the DHCP server on the network. No additional settings

are required for this page unless you need to change the network configuration. The

DHCP status of the camera is "OFF" by default.

Other settings:

For IP address, Subnet mask, Default gateway, DNS 1, and DNS 2, the DHCP server

will assign these values automatically when DHCP is in "ON" status; otherwise, you

need to key in the values manually.

Note: Where no IP address is a ssigned from the DHCP server, the system will set the Link-Local

Address automatically. Chunghwa Telecom DNS: 168.95.1.1

Cable network

setting page