38
Basic Setting > Network > Wireless (wireless network setting page) The wired network setting procedure shall apply where the LAN socket is connected
to the network cable.
Where wireless network is required, you need to remove the network cable after
completing the wireless network setting and restart the machine.
Basic Setting > Network > Wireless: From wireless access point scan list,
select the wireless access point you want to connect, click “Next Step” to
configure further like authentication type and encryption settings.
Click Scan to refresh
wireless AP list.
Click from AP list to bring
in the SSID, or manually
input the correct SSID.
Click next step to configure
authentication type, etc.