12
Camera Setting from a Router You can use DHCP when you want to use the camera on the Intranet (LAN). However,
the IP must be set to fixed when you want to use the camera on a WAN. For this
application, it is required to set up the function of the virtual server on the ADSL
router. Follow the steps below to complete the setting:
1. Enter the camera setting page to set a fixed IP. (Refer to the “Network Setting”.)
Ex.: 192.168.0.49
2. Enter the ADSL router main setting page. Ex.: Zonet ADSL router
3. Enter the Virtual Server setting page.
a. Set “mapping of HTTP Port (80) to 192.168.0.49 ”.
b. Restart ADSL router.
When completing the setting, you can operate the camera from the WAN IP Address
via the ADSL router.
The Virtual Server setting screen of the Zonet ADSL router
Note: The virtual server setting screen is not the same for all ADSL routers. Refer to the manual of the
ADSL router you purchased for more information about the setting.