43
The IP address of the camera is 192.168.0.20 by default when DHCP is “OFF”. W hen
you select “DHCP ON” and access to the DHCP network environment, the camera
will automatically s end a DHCP packet to request an IP address. This IP address is
assigned automatically from the DHCP server on the network. No additional settings
are required for this page unless you need to change the network configuration. The
DHCP status of the camera is “OFF” by default.
Other settings:
For IP address, Subnet mask, Default gateway, DNS 1, and DNS 2, the DHCP server
will assign these values automatically when DHCP is in "ON" status; otherwise, you
need to key in the values manually.
Test and save wireless settings:
.Finally, click “Connect” to test and save the wireless settings.
Setting of the video steaming port (HTTP and factory default are recommended)
1. HTTP: Port 80 can pass through most firewalls. Video streams are transmitted
through HTTP Port (80 by default) to ensure passing through firewalls.
2. RTSP: Port 554 uses a fixed port (i.e. TCP) or can be defined b y users to ensure
reliable data transmission. Video st reams are transmitted through RTSP Port (554
by default) to avoid video fragment or mosaics due to poor transmission quality.
3. RTP: Port 50000 to 60000 are UDP ports and can be defined by users. They
provide the fastest but unreliable transmission service. Vid eo streams are
transmitted thought UDP Port (50000~60000 by default) to ensure the fastest
Test connection status is
shown here
Click connect button to
test and save.