AT&T 2.1.1 Audix Voice Power Initial Implementation Press F3 Save, Changing Service Assignments

AUDIX Voice Power Initial Implementation

10.Press [F3] (SAVE).

—The information is entered, the Assign Service to Voice Channels form closes, and a Command Output window appears.

11.Press [F6] (CANCEL) to close the Command Output window and return to the Voice Equipment window.

12.	Reopen the Assign Service to Voice Channels form by pressing
	[F8] (CHG-KEYS) and then pressing [F3] (ASSIGN) and repeat Steps 7
.	through 11 until services have been assigned to all voice channels.

13. Press [F6] (CANCEL) repeatedly to return to the Voice System Administration menu.

Changing Service Assignments

To change service assignments, use the above procedure. The new assignments will replace the old assignments. To unassign a channel, press

[F8] (CHG-KEYS) and then press [F4] (UNASSIGN). The Unassign Service From Voice Channel form appears. Enter the channel number(s) to be unassigned, and press [F3] (SAVE). Channelsshould not beleftunassigned.’ln most cases, an unassigned channel results in loss of system capacity. Also, a call to an unassigned channel will result in an Event Log error message.

2-6