AT&T 2.1.1 manual Displaying Feature Access Codes, System 75/DEFINITY G1 Feature Access Code Form

AUDIX Voice Power Initial Implementation

Displaying Feature Access Codes

The codes used by System 75 or DEFINITY G1 to activate/deactivate the Message Waiting Lamp should be verified by logging into the switch and entering display feature-access-codeson the command line.

Page 2 of the Feature Access Code form lists the codes needed to activate/deactivate the Message Waiting Lamp. (See Figure 2-1.)The following fields in the Feature Access Code form should be compared against FORM C. If necessary, update FORM C in the Planning Guide to reflect the values displayed on the Feature Access Code form.

■Leave Word Calling Send a Message: —Use this value for the AUDIX Voice Power System Parameter Code to Light.

■Leave Word Calling Cancel a Message: — Use this value for the AUDIX Voice Power System Parameter Code to Extinguish.

		Page 2 of 3
FEATURE ACCESS CODE (FAC)
Group Control Restrict Activation: 125		Deactivation:	126
Hunt Group Busy Activation:	*8	Deactivation:	#8
Last Number Dialed Access Code: *9
Leave Word Calling Message Retrieval Lock: *1
Leave Word Calling Message Retrieval Unlock: #1
Leave Word Calling Send a Message: *4
Leave Word Calling Cancel a Message: #4
Print Messages Access Code:
Priority Calling Access Code: *7
Program Access Code:	*0	Deactivation:	#3
Send All Calls Activation:	*3
SMDR Account Code Access Code: *6
Transfer Into AUDIX:	123
Trunk Answer Any Station Access Code:		Deactivation:	106
User Control Restrict Activation:	105

Voice Coverage Message Retrieval Access Code: 140

Voice Principal Message Retrieval Access Code: 141

Figure 2-1.System 75/DEFINITY G1 Feature Access Code Form (Page 2)

2-12