CN8000 User Manual

User Macros

User Macros are used to perform specific actions on the remote server. To create the macro, do the following:

1. Select the User Macros radio button, then click Add.

User Macro operation is the same under the JavaClient as it is under the WinClient. See User Macros, page 79, for details.

System Macros

System Macros are used to create exit macros for when you close a session. For example, as an added measure of security, you could create a macro that sends the Winkey-L combination which would cause the remote device’s login page to come up the next time the device was accessed. To create the macro, do the following:

1. Select System Macros, then click Add.

System Macro operation is the same under the JavaClient as it is under the WinClient. See System Macros, page 83, for details.

112