4. Administration
Network Configuration
IPv4 Configuration / IPv6 Configuration
The CN8000 can either have its IPv4 or IPv6 address assigned dynamically at
For dynamic IP address assignment, select the Obtain IP address automatically [DHCP], radio button. (This is the default setting.)
To specify a fixed IP address, select the Set IP address manually [Fixed IP], radio button and fill in the IP address.
Note: 1. If you choose Obtain IP address automatically, when the switch starts up it waits to get its IP address from the DHCP server. If it hasn’t obtained the address after one minute, it automatically reverts to its factory default IP address (192.168.0.60.)
2.If the CN8000 is on a network that uses DHCP to assign network addresses, and you need to ascertain its IP address, see IP Address Determination, page 165, for information.
IPv4 DNS Server / IPv6 DNS Server
The CN8000 can either have its DNS server address assigned automatically, or a fixed address can be specified.
For automatic DNS Server address assignment, select the Obtain DNS server address automatically, radio button.
To specify a fixed address, select the Set DNS server address manually, radio button and fill in the required information.
Note: Specifying an alternate DNS Server address is optional.
39