| 4. Administration |
|
|
|
|
|
|
Parameter | Explanation |
|
|
Local/Remote Share | Defines how the CN8000 is to be controlled when multiple |
Mode | users have logged on, as follows: |
| Share: Enables both local and remote users to |
| simultaneously share control over the CN8000. |
| Commands are executed in a chronological order. |
| Local Occupy: Grants exclusive control to the local user. |
| Remote users can still view the session but cannot |
| execute commands. |
| Remote Occupy: Grants exclusive control to the remote |
| user(s). The local user can still view the session but |
| cannot execute commands. |
| In Remote Occupy Mode, users can take advantage of the |
| Message Board, which allows a user to take control of the |
| keyboard and mouse or keyboard, mouse, and video of a |
| Share port (see The Message Board, page 89). |
|
|
Reset | Some configuration changes only take effect after a |
| CN8000 reset. These include changes on the Network |
| page; a Log Server port change; enabling/disabling |
| browser access; and upgrading the firmware. |
| When those changes are made, a check is automatically |
| put in the Reset on Exit box. |
| To have the changes take effect, log out and then log back |
| in again. A wait of approximately 30 to 60 seconds is |
| necessary before logging in following a reset. |
| Note: If the CN8000’s performance degrades, reset it by |
| putting a check in the Reset on Exit box, and then log out / |
| log in. |
|
|
65