CN8000 User Manual

5.Select the report options you would like sent. Choices include: Report IP address, Report system reboot, Report user login and Report user logout.

Log Server

Important transactions that occur on the CN8000, such as logins and internal status messages, are kept in an automatically generated log file. See Chapter 7, The Log Server, for details on setting up the log server.

ŠSpecify the MAC address of the computer that the Log Server runs on in the MAC address field.

ŠSpecify the port used by the computer that the Log Server runs on to listen for log details in the Service Port field. The valid port range is 1–65535. The default port number is 9001.

Note: The port number must be different than the one used for the Program port (see Program, page 38).

SNMP Server

To be notified of SNMP trap events, do the following:

1.Check Enable SNMP Agent.

2.Key in the Server IP address and Service Port number of the computer to be notified of SNMP trap events. The valid port range is 1-65535.

Note: The following SNMP trap events are sent: System Power On, Login Failure, and System Reset.

42