CN8000 User Manual
Item | Action |
Dial Out Schedule This entry sets up the times you want the CN8000 to dial out over the ISP connection.
| Every provides a listing of fixed times from every hour to every |
| four hours. |
| If you select Every two hours (for example), the CN8000 will |
| start dialing out every two hours beginning at the next |
| complete hour (if it is now 13:10, it will start dialling at 14:00). |
| If you don't want the CN8000 to dial out on a fixed schedule, |
| select Never from the list. |
| Daily at will dial out once a day at a specified time. Use the |
| hh:mm format to specify the time. |
| PPP online time specifies how long you want the ISP connection |
| to last before terminating the session and hanging up the |
| modem. A setting of zero means it is always on line. |
|
|
Emergency Dial | If the CN8000 gets disconnected from the network, or the network |
Out | goes down, this function puts the CN8000 on line via the ISP dial up |
| connection. |
| If you choose PPP stays online until network recovery, the PPP |
| connection to the ISP will last until the network comes back up or |
| the CN8000 reconnects to it. |
| If you choose PPP online time the connection to the ISP will |
| terminate after the amount of time that you specify is up. A |
| setting of zero means it is always on line. |
Dial Out Mail | This section provides email notification of the CN8000’s IP address |
Configuration | once its been obtained from the ISP. |
| Note: This email notification differs from the one configured under |
| SMTP Settings, page 41, in that it uses the ISP mail server rather |
| than the internal company’s mail server. |
| Key in the IP address or domain name of your SMTP server in |
| the SMTP Server IP Address field. |
| Key in the email address of the person responsible for the SMTP |
| server (or some other equally responsible administrator), in the |
| Email From field. |
| Key in the email address (addresses) of where you want the |
| report sent to in the To field. If you are sending the report to more |
| than one email address, separate the addresses with a comma |
| or a semicolon. |
| If your server requires authentication, put a check in the My |
| server requires authentication checkbox, then key in the |
| appropriate account name and password in the fields, below. |
When you have finished making your settings on this page, click Apply.
60