Chapter 2
Hardware Setup
1.Important safety information regarding the placement of this device is provided on page 157. Please review it before proceeding.
2.Make sure that the power to any device that you connect to the installation has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function.
Mounting
Rack Mounting
For convenience and flexibility, the CN8000 can be mounted on a system rack. To rack mount the unit do the following:
1.Remove the two original screws from the bottom of the unit (near the rear of the unit).
2.Using the screws provided with the rack mount kit, screw the mounting bracket into the CN8000 – as shown in the diagram below.
Phillips hex head
M3 x 8
13