4. Administration
Adding Filters
To add an IP filter, do the following:
1. Click Add. A dialog box similar to the one below appears:
2.Key the address you want to filter in the From: field.
To filter a single IP address, key the same address in the To: field.
To filter a continuous range of addresses, key in the end number of the range in the To: field.
3.After filling in the address, click OK.
4.Repeat these steps for any additional IP addresses you want to filter.
To add a MAC filter, do the following:
1. Click Add. A dialog box similar to the one below appears:
2.Specify the MAC address in the dialog box, then click OK.
3.Repeat these steps for any additional MAC addresses you want to filter.
IP Filter / MAC Filter Conflict
If there is a conflict between an IP filter and a MAC filter – for example, where a computer’s IP address is allowed by the IP filter but it’s MAC address is excluded by the MAC filter – then that computer’s access is blocked.
In other word’s, if either filter blocks a computer, then the computer is blocked, no matter what the other filter is set to.
49