KH1508Ai / KH1516Ai User Manual

To allow authentication and authorization for the KH1508Ai / KH1516Ai via LDAP / LDAPS, refer to the information in the table, below:

Item

Action

 

 

Enable

Put a check in the Enable checkbox to allow LDAP / LDAPS

 

authentication and authorization.

 

 

Type

Click a radio button to specify whether to use LDAP or LDAPS.

 

 

LDAP Server IP

Fill in the IP address and port number for the LDAP or LDAPS

and Port

server.

 

Š You can use the IPv4 address, the IPv6 address or the

 

domain name in the LDAP Server field.

 

Š For LDAP, the default port number is 389; for LDAPS, the

 

default port number is 636.

 

 

Timeout

Set the time in seconds that the KH1508Ai / KH1516Ai waits for

 

an LDAP or LDAPS server reply before it times out.

 

 

Admin DN

Consult the LDAP / LDAPS administrator to ascertain the

 

appropriate entry for this field. For example, the entry might

 

look like this:

 

ou=kh1516ai,dc=aten,dc=com

 

 

Admin Name

Key in the LDAP administrator’s username.

 

 

Search DN

Set the distinguished name of the search base. This is the

 

domain name where the search starts for user names.

 

 

Admin Group

Key in the Group Name for KH1508Ai / KH1516Ai administrator

 

users.

 

If Enable Authorization is not checked, this field is used to

 

authorize users that are logging in. If a user is in this group, the

 

user receives full access rights. If a user is not in this group, the

 

user only receives limited access rights. Consult the LDAP /

 

LDAPS administrator to ascertain the appropriate value.

 

 

 

(Continues on next page.)

120