Chapter 5. Logging In
The Windows Client AP Connection Screen
A description of the Connection Screen is given in the following table:
Item | Description |
|
|
Server List | Each time the WinClient.exe file is run, it searches the user's |
| local LAN segment for KH1508Ai / KH1516Ai, and lists |
| whichever ones it finds in this box. If you want to connect to |
| one of these units, |
| |
| Note: 1. The switch will not appear in the list unless its |
| Enable Device List configuration parameter has |
| been enabled. |
| 2. Only units whose Access Port settings for Program |
| match the number specified for Port in the Server |
| area of this dialog box appear in the Server List |
| window. |
|
|
Server | This area is used when you want to connect to a KH1508Ai / |
| KH1516Ai at a remote location. You can drop down the IP list |
| box and select an address from the list. If the address you |
| want isn't listed, you can key in the target IP address in the IP |
| field, and its port number in the Port field. (If you don't know |
| the port number, contact your Administrator.) |
| When the IP address and Port number have been |
| specified, click Connect. (See Connecting – Windows |
| |
| When you have finished with your session and come back |
| to this dialog box, click Disconnect to end the connection. |
|
|
Message List | Located just to the right of the Server panel, the Message List |
| panel lists status messages regarding the connection to the |
| KH1508Ai / KH1516Ai. |
|
|
Switch to Remote View | Once you have been authenticated (see Connecting – |
| Windows Client AP, page 54 for details), this button becomes |
| active. Click it to switch to the GUI Main Page. The GUI Main |
| Page is described on page 59. |
|
|
53