Chapter 4. OSD Operation
Skip Mode Switching
This feature allows you to switch between computers in order to monitor them manually. You can focus on a particular port for as long as you like – as opposed to
Entering Skip Mode
To enter Skip mode, key in the following Hotkey combination:
1.Enter the Hotkey mode by pressing the:
[Num Lock] +
2.Press one of the [Arrow] keys.
After you press one of the keyboard arrows, you automatically exit Hotkey mode and enter Skip mode where you can switch ports as follows:
←Skips to the first accessible port. (See SCAN/SKIP MODE, page 31, for information regarding accessible ports.)
→Skips to the next accessible port.
↑Skips to the last accessible port of the previous station.
↓Skips to the first accessible port of the next station.
Once you are in Skip mode, you can continue skipping by pressing the arrow keys. You do not have to use the [Num Lock] +
While Skip mode is in effect, ordinary keyboard and mouse functions are suspended – only Skip mode compliant keystrokes can be input. You must exit Skip mode to regain normal control of the console.
Exiting Skip Mode
1. To exit Skip mode, press [Esc] or [Spacebar].
43