Appendix

Safety Instructions

General

ŠThis product is for indoor use only.

ŠRead all of these instructions. Save them for future reference.

ŠFollow all warnings and instructions marked on the device.

ŠDo not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result.

ŠDo not use the device near water.

ŠDo not place the device near, or over, radiators or heat registers.

ŠThe device cabinet is provided with slots and openings to allow for adequate ventilation. To ensure reliable operation, and to protect against overheating, these openings must never be blocked or covered.

ŠThe device should never be placed on a soft surface (bed, sofa, rug, etc.) as this will block its ventilation openings. Likewise, the device should not be placed in a built in enclosure unless adequate ventilation has been provided.

ŠNever spill liquid of any kind on the device.

ŠUnplug the device from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

ŠThe device should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

ŠThe device is designed for IT power distribution systems with 230V phase-to-phase voltage.

ŠTo prevent damage to your installation it is important that all devices are properly grounded.

ŠThe device is equipped with a 3-wire grounding type plug. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not attempt to defeat the purpose of the grounding-type plug. Always follow your local/national wiring codes.

ŠDo not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or tripped over.

163